Brake Testers - Car and Van

Car and Van Brake Testers

Back to products

Product code: D402

4 out of 5 1 Review

3T Roller Brake Tester (MOT C4)

  • In Stock
  • 2 Year Warranty
  • Delivery Included
  • Installation Included
  • 4 out of 5 1 Review
  • Product code: D402

  • 3T Roller Brake Tester (MOT C4)

    • In Stock
    • 2 Year Warranty
    • Delivery Included
    • Installation Included
Description
Tech spec
Downloads
Reviews

3T Roller Brake Tester (MOT C4)

The D402 is our sturdy and reliable Class 4 Roller Brake Tester with 2000+ units in daily use across the UK. In standard configuration, the D402 can be used as a stand-alone brake tester for use in traditional MoT bays, however, it can also be upgraded at anytime with a four point weighing system to enable motorcycle testing and making it compatible with the new ATL One Man Test from the DVSA.

The chassis is manufactured to a very high standard and easily deals with the exteme demands of modern day testing. It has a load capacity of 3000kg and the whole test can be operated wirelessly using an RF remote control (no line-of-site required).

MoT Classes 1,2,3 and 4 approved, 4x4 testing as standard, auto efficiency calculation, radio frequency (RF) remote control, fully galvanised roller bed, optional control system layouts to suit individual premises.

Expertise

With over 35 years of experience & more than 4000 garages using our products, we have the knowledge & expertise to advise you on all your workshop needs.

Installation

Our Garage Equipment Association (GEA) accredited and qualified engineers will install your equipment and provide demonstrations as required. While we’re there, we’ll answer any questions you may have regarding operation and maintenance, and we’ll also share our best practices to ensure longevity.

Ongoing Support

Once you’re up and running, we'll continue to provide you with ongoing customer support. We offer a variety of maintenance and calibration contracts to keep your equipment in the best working order and maximise its operational life.

SpecificationsD402D403D702
Power (Full Load):3ph 400V / 50 Hz / 32A

3ph 400V / 50 Hz / 32A
1ph 230V / 50 Hz / 32A

3ph 400V / 50 Hz / 32A
Motors - 3ph:2 x 3.0 kW2 x 2.2 kW2 x 4.0 kW
Motors - 1ph:N/A2 x 2.2 kWN/A
Electronics:USB Interface - PC ControlledUSB Interface - PC ControlledUSB Interface - PC Controlled
Brake Testing Speed:2.9 km/h2.6 km/h2.9 km/h
Roller Bed(s) Weight and Build:325 kg – Fully Galvanised350 kg – Fully Galvanised395 kg – Fully Galvanised
Max. Brake Force (per wheel):800 kgf600 kgf1250 kgf
Max. Axle Load:3000 kg2500 kg4000 kg
Roller Width:700 mm600 mm900 mm
Roller Centres Dimension:420 mm370 mm420 mm
Friction Roller Surface:0.9 μ dry, > 0.6 wet0.9 μ dry, > 0.6 wet0.9 μ dry, > 0.6 wet
Roller Bed Chassis Dimensions:2340 x 660 x 300 mm (L x W x H)880 x 780 x 215 mm (L x W x H)1440 x 660 x 300 mm (L x W x H)
Display Dimensions:LED Monitor, 22" standard (larger optional)LED Monitor, 22" standard (larger optional)LED Monitor, 22" standard (larger optional)
Control System:GCP3 / GCP4 Control Station (Windows 7 + SW900 Software)GCP3 / GCP4 Control Station (Windows 7 + SW900 Software)GCP3 / GCP4 Control Station (Windows 7 + SW900 Software)
Communication:USBUSBUSB
Operator Control:Keyboard / RF Remote Control (50m+ range)Keyboard / RF Remote Control (50m+ range)Keyboard / RF Remote Control (50m+ range)
Axle Weighing System:Optional (D402W)Optional (D403W)Optional (D702W)

Customer reviews

  • D402

    good reliable machine no faults in 3 years from installation.
    hex headed bolts on top plates I have changed for domed Allen bolts as the hex bolts were too easy to trip over.
    pity there isnt a selectable override to stop rollers cutting-out would be good for testing forward/backward play in suspension bushes etc

Write a review

Description

The D402 is our sturdy and reliable Class 4 Roller Brake Tester with 2000+ units in daily use across the UK. In standard configuration, the D402 can be used as a stand-alone brake tester for use in traditional MoT bays, however, it can also be upgraded at anytime with a four point weighing system to enable motorcycle testing and making it compatible with the new ATL One Man Test from the DVSA.

The chassis is manufactured to a very high standard and easily deals with the exteme demands of modern day testing. It has a load capacity of 3000kg and the whole test can be operated wirelessly using an RF remote control (no line-of-site required).

MoT Classes 1,2,3 and 4 approved, 4x4 testing as standard, auto efficiency calculation, radio frequency (RF) remote control, fully galvanised roller bed, optional control system layouts to suit individual premises.

Tech spec
SpecificationsD402D403D702
Power (Full Load):3ph 400V / 50 Hz / 32A

3ph 400V / 50 Hz / 32A
1ph 230V / 50 Hz / 32A

3ph 400V / 50 Hz / 32A
Motors - 3ph:2 x 3.0 kW2 x 2.2 kW2 x 4.0 kW
Motors - 1ph:N/A2 x 2.2 kWN/A
Electronics:USB Interface - PC ControlledUSB Interface - PC ControlledUSB Interface - PC Controlled
Brake Testing Speed:2.9 km/h2.6 km/h2.9 km/h
Roller Bed(s) Weight and Build:325 kg – Fully Galvanised350 kg – Fully Galvanised395 kg – Fully Galvanised
Max. Brake Force (per wheel):800 kgf600 kgf1250 kgf
Max. Axle Load:3000 kg2500 kg4000 kg
Roller Width:700 mm600 mm900 mm
Roller Centres Dimension:420 mm370 mm420 mm
Friction Roller Surface:0.9 μ dry, > 0.6 wet0.9 μ dry, > 0.6 wet0.9 μ dry, > 0.6 wet
Roller Bed Chassis Dimensions:2340 x 660 x 300 mm (L x W x H)880 x 780 x 215 mm (L x W x H)1440 x 660 x 300 mm (L x W x H)
Display Dimensions:LED Monitor, 22" standard (larger optional)LED Monitor, 22" standard (larger optional)LED Monitor, 22" standard (larger optional)
Control System:GCP3 / GCP4 Control Station (Windows 7 + SW900 Software)GCP3 / GCP4 Control Station (Windows 7 + SW900 Software)GCP3 / GCP4 Control Station (Windows 7 + SW900 Software)
Communication:USBUSBUSB
Operator Control:Keyboard / RF Remote Control (50m+ range)Keyboard / RF Remote Control (50m+ range)Keyboard / RF Remote Control (50m+ range)
Axle Weighing System:Optional (D402W)Optional (D403W)Optional (D702W)
Reviews

Customer reviews

  • D402

    good reliable machine no faults in 3 years from installation.
    hex headed bolts on top plates I have changed for domed Allen bolts as the hex bolts were too easy to trip over.
    pity there isnt a selectable override to stop rollers cutting-out would be good for testing forward/backward play in suspension bushes etc

Write a review

Request a callback

- Have a question? Leave your number and we'll call you back

Request callback