Brake Testers - Car and Van

Car and Van Brake Testers

Back to products

Product code: D702

4T Split-bed Roller Brake Tester (MOT C7)

  • In Stock
  • 2 Year Warranty
  • Installation Included
  • Delivery Included
  • Product code: D702

  • 4T Split-bed Roller Brake Tester (MOT C7)

    • In Stock
    • 2 Year Warranty
    • Installation Included
    • Delivery Included
Description
Tech spec
Downloads
Reviews

4T Split-bed Roller Brake Tester (MOT C7)

The D702 is our Class 7 MoT approved roller brake tester. Just like the D402 and D403, it is high specification and is operated using the same control platform. In standard configuration, the D702 can be used as a stand alone brake tester for use in traditional MoT bays. It can also be upgraded at anytime with an eight point weighing system to enable motorcycle testing and making it compatible with the new ATL One Man Test from the DVSA.

The D702 has a large 4000kg axle load capacity allowing it to perform effortlessly day-in day-out with heavy duty workloads. Similar to the D403, the chassis are a split bed configuration but with a joinnig plate to provide a fixed distance when installed.

Expertise

With over 35 years of experience & more than 4000 garages using our products, we have the knowledge & expertise to advise you on all your workshop needs.

Installation

Our Garage Equipment Association (GEA) accredited and qualified engineers will install your equipment and provide demonstrations as required. While we’re there, we’ll answer any questions you may have regarding operation and maintenance, and we’ll also share our best practices to ensure longevity.

Ongoing Support

Once you’re up and running, we'll continue to provide you with ongoing customer support. We offer a variety of maintenance and calibration contracts to keep your equipment in the best working order and maximise its operational life.

SpecificationsD402D403D702
Power (Full Load):3ph 400V / 50 Hz / 32A

3ph 400V / 50 Hz / 32A
1ph 230V / 50 Hz / 32A

3ph 400V / 50 Hz / 32A
Motors - 3ph:2 x 3.0 kW2 x 2.2 kW2 x 4.0 kW
Motors - 1ph:N/A2 x 2.2 kWN/A
Electronics:USB Interface - PC ControlledUSB Interface - PC ControlledUSB Interface - PC Controlled
Brake Testing Speed:2.9 km/h2.6 km/h2.9 km/h
Roller Bed(s) Weight and Build:325 kg – Fully Galvanised350 kg – Fully Galvanised395 kg – Fully Galvanised
Max. Brake Force (per wheel):800 kgf600 kgf1250 kgf
Max. Axle Load:3000 kg2500 kg4000 kg
Roller Width:700 mm600 mm900 mm
Roller Centres Dimension:420 mm370 mm420 mm
Friction Roller Surface:0.9 μ dry, > 0.6 wet0.9 μ dry, > 0.6 wet0.9 μ dry, > 0.6 wet
Roller Bed Chassis Dimensions:2340 x 660 x 300 mm (L x W x H)880 x 780 x 215 mm (L x W x H)1440 x 660 x 300 mm (L x W x H)
Display Dimensions:LED Monitor, 22" std - (larger optional)LED Monitor, 22" std - (larger optional)LED Monitor, 22" std - (larger optional)
Communication:USBUSBUSB
Operator Control:RF Remote Control (50m+ range)RF Remote Control (50m+ range)RF Remote Control (50m+ range)
Axle Weighing System:Optional (D402W)Optional (D403W)Optional (D702W)

Customer reviews

Nobody has left a review for this product yet, be the first to do so.

Write a review

Description

The D702 is our Class 7 MoT approved roller brake tester. Just like the D402 and D403, it is high specification and is operated using the same control platform. In standard configuration, the D702 can be used as a stand alone brake tester for use in traditional MoT bays. It can also be upgraded at anytime with an eight point weighing system to enable motorcycle testing and making it compatible with the new ATL One Man Test from the DVSA.

The D702 has a large 4000kg axle load capacity allowing it to perform effortlessly day-in day-out with heavy duty workloads. Similar to the D403, the chassis are a split bed configuration but with a joinnig plate to provide a fixed distance when installed.

Tech spec
SpecificationsD402D403D702
Power (Full Load):3ph 400V / 50 Hz / 32A

3ph 400V / 50 Hz / 32A
1ph 230V / 50 Hz / 32A

3ph 400V / 50 Hz / 32A
Motors - 3ph:2 x 3.0 kW2 x 2.2 kW2 x 4.0 kW
Motors - 1ph:N/A2 x 2.2 kWN/A
Electronics:USB Interface - PC ControlledUSB Interface - PC ControlledUSB Interface - PC Controlled
Brake Testing Speed:2.9 km/h2.6 km/h2.9 km/h
Roller Bed(s) Weight and Build:325 kg – Fully Galvanised350 kg – Fully Galvanised395 kg – Fully Galvanised
Max. Brake Force (per wheel):800 kgf600 kgf1250 kgf
Max. Axle Load:3000 kg2500 kg4000 kg
Roller Width:700 mm600 mm900 mm
Roller Centres Dimension:420 mm370 mm420 mm
Friction Roller Surface:0.9 μ dry, > 0.6 wet0.9 μ dry, > 0.6 wet0.9 μ dry, > 0.6 wet
Roller Bed Chassis Dimensions:2340 x 660 x 300 mm (L x W x H)880 x 780 x 215 mm (L x W x H)1440 x 660 x 300 mm (L x W x H)
Display Dimensions:LED Monitor, 22" std - (larger optional)LED Monitor, 22" std - (larger optional)LED Monitor, 22" std - (larger optional)
Communication:USBUSBUSB
Operator Control:RF Remote Control (50m+ range)RF Remote Control (50m+ range)RF Remote Control (50m+ range)
Axle Weighing System:Optional (D402W)Optional (D403W)Optional (D702W)
Reviews

Customer reviews

Nobody has left a review for this product yet, be the first to do so.

Write a review

Request a callback

- Have a question? Leave your number and we'll call you back

Request callback