Commercial In-ground Lifts

Back to products

Product code: BAC-UL2

30T Twin Column, Commercial Vehicle In-Ground Lift

  • 2 Year Warranty
  • Delivery Included
  • Installation Included
  • Product code: BAC-UL2

  • 30T Twin Column, Commercial Vehicle In-Ground Lift

    • 2 Year Warranty
    • Delivery Included
    • Installation Included
Description
Tech spec
Videos
Downloads
Reviews

30T Twin Column, Commercial Vehicle In-Ground Lift

This commercial vehicle in-ground lift is ideal for workshops specialising in heavy trucks, buses and plant machinery. Its innovative design allows for one lifting column to be remote controlled and positioned at any point to suit the vehicle's lifting points.

When not in use, the columns lay completely flat allowing the entire workshop area to be used as normal. The protective covers can withstand an impressive drive-over load of 7T.

The lift is operated using a modern touch-screen hand control. In the event of any errors the system can be remotely accessed and interrogated to ensure a quick first-time resolution. 

The entire system is plug & play, and is supplied as a complete pre-assembled product. Simply excavate, prepare the pit, lower in the equipment and back-fill. This system is quick to install and commission, and every installation is carefully overseen at every stage by our experienced team.

Features

  • Designed specifically for the safe lifting of trucks, tractor units and buses with one front axle and up to three rear axles
  • Plug & Play - Factory tested with columns mounted in a hot galvanized cassette ready for installation
  • When not in use, all cross beams and the rolling cover lower to floor level along the total pit length providing a completely flat workshop area 
  • The front column is fixed; the rear column position is adjustable by remote control
  • The lift is operated from an easy-to-use touch screen remote control which, among other things, informs the user of the lifting height and load
  • Double nickel surface treatment protects the columns against corrosion and ensures a long life
  • 2 independent hydraulic circuits in each lifting column offer optimum safety - one circuit can hold the entire load if necessary
  • CE certified - complies with European Standard EN 1493

Expertise

With over 35 years of experience & more than 4000 garages using our products, we have the knowledge & expertise to advise you on all your workshop needs.

Project Management

Installing a new test lane or large service equipment can be a daunting project. Boston will provide project management and assistance every step of the way to ensure maximum efficiency and an on time completion. With our detailed timeline of the works and installation you’ll be able to plan your business around it and minimise any disruption.

Installation

Our Garage Equipment Association (GEA) accredited and qualified engineers will install your equipment and provide demonstrations as required. While we’re there, we’ll answer any questions you may have regarding operation and maintenance, and we’ll also share our best practices to ensure longevity.

Ongoing Support

Once you’re up and running, we'll continue to provide you with ongoing customer support. We offer a variety of maintenance and calibration contracts to keep your equipment in the best working order and maximise its operational life.

Specifications 
Capacity2 x 15T
Stroke1900 mm
No. of columns2
No. of moveable columns1
Cassette length8700 mm
Cassette width 1030 mm
Lifting points distance2500 - 7500 mm
Speed lifting / lowering80s
Power12kW
Oil required per column27L
Weight4.6T

Customer reviews

Nobody has left a review for this product yet, be the first to do so.

Write a review

Description

This commercial vehicle in-ground lift is ideal for workshops specialising in heavy trucks, buses and plant machinery. Its innovative design allows for one lifting column to be remote controlled and positioned at any point to suit the vehicle's lifting points.

When not in use, the columns lay completely flat allowing the entire workshop area to be used as normal. The protective covers can withstand an impressive drive-over load of 7T.

The lift is operated using a modern touch-screen hand control. In the event of any errors the system can be remotely accessed and interrogated to ensure a quick first-time resolution. 

The entire system is plug & play, and is supplied as a complete pre-assembled product. Simply excavate, prepare the pit, lower in the equipment and back-fill. This system is quick to install and commission, and every installation is carefully overseen at every stage by our experienced team.

Features

  • Designed specifically for the safe lifting of trucks, tractor units and buses with one front axle and up to three rear axles
  • Plug & Play - Factory tested with columns mounted in a hot galvanized cassette ready for installation
  • When not in use, all cross beams and the rolling cover lower to floor level along the total pit length providing a completely flat workshop area 
  • The front column is fixed; the rear column position is adjustable by remote control
  • The lift is operated from an easy-to-use touch screen remote control which, among other things, informs the user of the lifting height and load
  • Double nickel surface treatment protects the columns against corrosion and ensures a long life
  • 2 independent hydraulic circuits in each lifting column offer optimum safety - one circuit can hold the entire load if necessary
  • CE certified - complies with European Standard EN 1493
Tech spec
Specifications 
Capacity2 x 15T
Stroke1900 mm
No. of columns2
No. of moveable columns1
Cassette length8700 mm
Cassette width 1030 mm
Lifting points distance2500 - 7500 mm
Speed lifting / lowering80s
Power12kW
Oil required per column27L
Weight4.6T
Reviews

Customer reviews

Nobody has left a review for this product yet, be the first to do so.

Write a review

Request a callback

- Have a question? Leave your number and we'll call you back

Request callback