Brake Testers - Car and Van

Car and Van Brake Testers

Back to products

Product code: D412

5 out of 5 1 Review

NEW MODEL 3.5T Roller Brake Tester (MOT C4)

  • In Stock
  • 2 Year Warranty
  • 5 Year Roller Warranty
  • Delivery Included
  • Installation Included
  • 5 out of 5 1 Review
  • Product code: D412

  • NEW MODEL 3.5T Roller Brake Tester (MOT C4)

    • In Stock
    • 2 Year Warranty
    • 5 Year Roller Warranty
    • Delivery Included
    • Installation Included
Description
Tech spec
Downloads
Reviews

NEW MODEL 3.5T Roller Brake Tester (MOT C4)

The new D412 and D712 roller brake testers are the latest additions to our 2016 range. Developed with great attention to detail and manufactured to the highest of standards, they truly are state of the art, high-tech units.

In standard configuration, the D412 can be used as a standalone brake tester for use in traditional MoT bays. It can also be upgraded with a vehicle weighing system for motorycle testing and DVSA approved Automated Test Lanes. Using our latest SW900 software, every test is stored automatically should it ever need recalling, and remote 'over the internet' assistance is built in as standard; our engineers can connect immediately and diagnose your system remotely!

The chassis is fully galvanised and then painted with a durable, hard-wearing industrial finish. Rollers are supported with a FIVE year guarantee and are manufactured with longevity in mind. The D412 easily deals with the extreme demands of modern day testing. It has a load capacity of 3500kg and the whole test (non-ATL) can be operated wirelessly using our radio frequency ruggedised RFC-95 remote control.

The D412 is approved for MoT Classes 1,2,3 and 4, has 4WD testing as standard and automatic efficiency calculation for simple pass / fail test results. Optional control system layouts are available to suit individual premises (GCP3 and GCP4) and any of our emissions packages can easily be added at any time to provide a complete combined brake tester and emissions testing system.

Call our sales department or check the Tech Spec / Downloads tab for more details.

Features & Benefits
  • Roller beds galvanised and painted
  • Installation cartridges galvanised and painted
  • Single bed symmetrical chassis
  • 5 year roller surface guarantee
  • Very latest DVSA ATL software
  • Built-in remote on-line support (OSS)
  • Every official test saved automatically
  • Customer database with testing statistics
  • Emissions software included as standard
  • 4WD testing as standard
  • High quality RFC-95 remote control (50+ range)
  • 22" flat panel LED display (touch screen optional)
  • 40"+ secondary display (optional)
  • Motorcycle testing compatible (optional)
  • All software and electronics made in UK
SpecificationsD412D712
Power (Full Load):3ph 400V / 50 Hz / 32A

3ph 400V / 50 Hz / 32A

Motors - 3ph:2 x 3.0 kW2 x 4.0 kW
Electronics:USB Interface - PC ControlledUSB Interface - PC Controlled
Brake Testing Speed:2.9 km/h2.9 km/h
Roller Bed(s) Weight and Build:425 kg – Fully Galvanised and Painted510 kg – Fully Galvanised and Painted
Max. Brake Force (per wheel):900 kgf1450 kgf
Max. Axle Load:3500 kg4500 kg
Roller Width:700 mm900 mm
Roller Centres Dimension:420 mm420 mm
Friction Roller Surface:0.9 μ dry, > 0.6 wet0.9 μ dry, > 0.6 wet
Roller Bed Chassis Dimensions:2340 x 660 x 300 mm (L x W x H)2730 x 660 x 320 mm (L x W x H)
Display Dimensions:LED Monitor, 22" standard (larger optional)LED Monitor, 22" standard (larger optional)
Control System:GCP3 / GCP4 Control Station (Windows 7 + SW900 Software)GCP3 / GCP4 Control Station (Windows 7 + SW900 Software)
Communication:USBUSB
Operator Control:Keyboard / RF Remote Control (50m+ range)Keyboard / RF Remote Control (50m+ range)
Axle Weighing System:Optional (D412W)Optional (D712W)

Customer reviews

  • D412

    Installed now for 4 years + and has been faultless having the ability to choose any one of three displays is a definite bonus as some testers like one display better than others & sometimes a suspected brake fault shows up better on a different display

Write a review

Description

The new D412 and D712 roller brake testers are the latest additions to our 2016 range. Developed with great attention to detail and manufactured to the highest of standards, they truly are state of the art, high-tech units.

In standard configuration, the D412 can be used as a standalone brake tester for use in traditional MoT bays. It can also be upgraded with a vehicle weighing system for motorycle testing and DVSA approved Automated Test Lanes. Using our latest SW900 software, every test is stored automatically should it ever need recalling, and remote 'over the internet' assistance is built in as standard; our engineers can connect immediately and diagnose your system remotely!

The chassis is fully galvanised and then painted with a durable, hard-wearing industrial finish. Rollers are supported with a FIVE year guarantee and are manufactured with longevity in mind. The D412 easily deals with the extreme demands of modern day testing. It has a load capacity of 3500kg and the whole test (non-ATL) can be operated wirelessly using our radio frequency ruggedised RFC-95 remote control.

The D412 is approved for MoT Classes 1,2,3 and 4, has 4WD testing as standard and automatic efficiency calculation for simple pass / fail test results. Optional control system layouts are available to suit individual premises (GCP3 and GCP4) and any of our emissions packages can easily be added at any time to provide a complete combined brake tester and emissions testing system.

Call our sales department or check the Tech Spec / Downloads tab for more details.

Features & Benefits
  • Roller beds galvanised and painted
  • Installation cartridges galvanised and painted
  • Single bed symmetrical chassis
  • 5 year roller surface guarantee
  • Very latest DVSA ATL software
  • Built-in remote on-line support (OSS)
  • Every official test saved automatically
  • Customer database with testing statistics
  • Emissions software included as standard
  • 4WD testing as standard
  • High quality RFC-95 remote control (50+ range)
  • 22" flat panel LED display (touch screen optional)
  • 40"+ secondary display (optional)
  • Motorcycle testing compatible (optional)
  • All software and electronics made in UK
Tech spec
SpecificationsD412D712
Power (Full Load):3ph 400V / 50 Hz / 32A

3ph 400V / 50 Hz / 32A

Motors - 3ph:2 x 3.0 kW2 x 4.0 kW
Electronics:USB Interface - PC ControlledUSB Interface - PC Controlled
Brake Testing Speed:2.9 km/h2.9 km/h
Roller Bed(s) Weight and Build:425 kg – Fully Galvanised and Painted510 kg – Fully Galvanised and Painted
Max. Brake Force (per wheel):900 kgf1450 kgf
Max. Axle Load:3500 kg4500 kg
Roller Width:700 mm900 mm
Roller Centres Dimension:420 mm420 mm
Friction Roller Surface:0.9 μ dry, > 0.6 wet0.9 μ dry, > 0.6 wet
Roller Bed Chassis Dimensions:2340 x 660 x 300 mm (L x W x H)2730 x 660 x 320 mm (L x W x H)
Display Dimensions:LED Monitor, 22" standard (larger optional)LED Monitor, 22" standard (larger optional)
Control System:GCP3 / GCP4 Control Station (Windows 7 + SW900 Software)GCP3 / GCP4 Control Station (Windows 7 + SW900 Software)
Communication:USBUSB
Operator Control:Keyboard / RF Remote Control (50m+ range)Keyboard / RF Remote Control (50m+ range)
Axle Weighing System:Optional (D412W)Optional (D712W)
Reviews

Customer reviews

  • D412

    Installed now for 4 years + and has been faultless having the ability to choose any one of three displays is a definite bonus as some testers like one display better than others & sometimes a suspected brake fault shows up better on a different display

Write a review

Request a callback

- Have a question? Leave your number and we'll call you back

Request callback